No products in the cart.
Roll over image to zoom in
Seagate 8TB IronWolf 7200 rpm SATA III 3.5″ Internal NAS HDD
$254.99
Status:
Special Order
- 8TB Storage Capacity
- 3.5″ Form Factor
- SATA III 6 Gb/s Interface
- 256MB Cache
- 7200 rpm
- Up to 210 MB/s Data Transfer Rate
- 1 Million Hours MTBF
- Workload Rate: 180TB per Year
- 8760 Power-On Hours per Year
- 600,000 Load/Unload Cycles
Description
Designed for use in 1-8 bay NAS environments within home, SOHO, and SMB environments, the 8TB IronWolf 7200 rpm SATA III 3.5″ Internal NAS HDD from Seagate is built to withstand 24×7 operations, or 8760 hours per year.
This 8TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5″ form factor, and a 256MB cache, providing users with an ample storage capacity and data transfer speeds of up to 210 MB/s. This IronWolf hard drive also has an MTBF rating of 1 million hours, 600,000 load/unload cycles, 1 in 1015 non-recoverable read errors per bits read, and a workload rate of up to 180TB per year.
Specification
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 13.2 × 9.9 × 1.52 cm |
| Storage Capacity | Total: 8 TB SATA III (6 Gb/s) 3.5" HDD (7200 rpm) |
| Read Speed | Maximum: 210 MB/s |
| Buffer | 256 MB |
| Reliability | Encryption: No Endurance (Total Bytes Written): 180 TB Load/Unload Cycles: 600,000 Mean Time Between Failures (MTBF): 1.0 Million Hours |
| Power Draw | 8.8 W (Active) 7.6 W (Idle) 0.6 W (Standby) |
| Electrical | Supported Voltage: 5 VDC, 12 VDC Current: 1.8 A at 12 VDC |
| Manufacturer | SEAGATE |
| Capacity | 8 TB |
| Inches | 3.5" |
Reviews
There are no reviews yet.